Swing-out rotor for round bottom centrifuge tube.

Rotor type Swing-out
Tube dimensions (Ø × length) 16 × 105 mm
Capacity 12
Tube’s volume 10–15 ml
Max. speed 4200 rpm
Max. RCF: LMC-3000 1610 × g
Max. RCF: LMC-4200R 3160 × g
Tube manufacturers Nunc, Greiner, Greiner Bio-one, TPP etc.
Autoclavable +

Used with

Laboratory bench-top centrifuge with refrigeration LMC-4200R provides temperature control of biomaterial during centrifugation. Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists because it ensures conditions necessary for reproducibility of the sample preparation stage. Temperature control absence at this stage can cause unpredictable results. LMC-4200R is a modern centrifuge designed for operation with microtest plates, gel cards and tubes from 10 to 50 ml.

LMC-3000 is a modern low-speed bench-top centrifuge designed for operation with microtest plates and centrifuge tubes up to 50 ml. This device is widely used in biomedical profile laboratories.

Documentation

SKUProductTypeLanguageFile
BS-010208-BKRotor R-12/10BrochureEnglishDownload

Related Products

Rotor for two 8 x 0.2 ml PCR strip rows or 16 individual 0.2 ml PCR tubes.

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.

Swing-out rotor for round bottom centrifuge tube.

Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.

Swing-out rotor for conical bottom centrifuge tube.

Swing-out rotor for conical bottom centrifuge tube.

Rotor for 12 × 0.5 ml and 12 × 0.2 ml microtest tubes.

Rotor for 6x2/1.5 ml + 6x0.5 ml + 6x0.2 ml microtest tubes.

Rotor for 12 x 0.5 ml and 12 x 0.2 ml microtest tubes.

Bucket rotor without bucket adapters.

Rotor for 2 x 8-section 0,2 ml microtube strips.

Recently Viewed

8-Dimethylamino-2,3-benzophenoxazine hemi(zinc chloride) salt, Basic Blue 6 , Fast Blue 3R, Naphthol Blue

The a utomated sample processing system supports automatically uncapping, dispensing and recapping at one time. It can complete the aspiration of 96 samples from the original tubes or cryopreservation tubes to the deep-well multiwell plate, cell culture plate or PCR plate in 32 minutes in a single channel pipetting mode.

This product has multiple variants. The options may be chosen on the product page

Platforms

Platform PRSC-10

10 tubes 25-30 mm diameter (50 ml tubes).

Muriatic Acid; Hydrogen Chloride

Platforms

Platform PP-20

Flat platform with non-slip rubber mat can accommodate various low profile containers.

Iron(III) Sulphate Hydrate

Freeze Dryer

Pilot Freeze Dryer

After the samples become freeze-dried preparations, they are more stable, especially for high temperature sensitive drugs, and most of them can be transported and stored at 0-4℃ or even normal temperature after freeze-dried, so the transportation and storage cost and inactivation risk are greatly reduced. Compared with traditional drying methods, the bioactive materials can restore their pre-freeze-dried conformation and biological function after redissolution. Therefore, freeze-drying is the safest method with the least impact on the properties of the drying materials.

Products Best Selling

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Rotor R-12/10

SKU: BS-010208-BK Category: Brand:

Swing-out rotor for round bottom centrifuge tube.

Biosan

Rotor R-12/10
Rotor R-12/10