-
×
CALCIUM CHLORIDE DIHYDRATE AR
-
×
AZUR II FOR MICROSCOPY C.I. 52010
-
×
ACETALDEHYDE SOLN. ABT 20-30% PRACT LR
-
×
4-AMINOANTIPYRINE PURISS
-
×
Rack TR-21/50
-
×
VANADIUM PENTOXIDE LR
-
×
EUGENOL LR
-
×
BARIUM CHLORIDE DIHYDRATE CRYST. LR
-
×
CALCIUM STANDARD SOLUTION FOR ICP - 1000 mG/L IN HNO3
-
×
Adapter set BN-13/100-24
-
×
VINYL ACETATE MONOMER LR
Labaqua ultrapure systems are multi-purpose water purification systems. The Labaqua systems produce ultrapure and pure water directly from tap water.
Labaqua Bio system produces water with very low organic and RNase/DNase content that is intended for the use in molecular biology, including RNase sensitive applications.
Any configuration of a Labaqua ultrapure system produces both ultrapure and pure water. Ultrapure (Grade 1) water is dispensed through the point-of-use filter on the front panel. Pure (Grade 2) water is dispensed directly from the storage tank.
Labaqua ultrapure water can be used for the most demanding applications including, but not limited to: Inorganic trace analysis, Liquid chromatography, Cell culture, Molecular biology.
With resistivity of 18.2 Mega — Ohm*cm (0.055 μS/cm) ultrapure water produced by a Labaqua system exceeds requirements of all relevant standards (ISO 3696 Grade 1, ASTM Type I, CLSI Type I). Purified water is collected in a storage tank. An integrated recirculation system ensures consistent quality of water and reduces total organic carbon (TOC) to very low levels: <5ppb.
Pure water produced by the Labaqua systems complies with the requirements of ISO 3696 Grade 2 water and can be used for labware washing, wet chemistry methods, flame spectrophotometers, etc.
All Labaqua systems have a controller with a color graphic LCD display for water quality indication. The LCD display provides all necessary information about system status, as well as system flow-chart the remaining pre-filter life and deionization (DI) module performance. The smart DI module monitoring system also provides a reduction in running costs. A user is instructed to replace the DI module only when the module is near the end of its service life.
All cartridges and filters are easily accessible and no tools are required to replace them. The Labaqua system can be installed on a laboratory bench or mounted on a wall.
Features:
- Volumetric dispense – enables the user to set accurate dispensing volume for each dispense cycle. The dispense volume can be set either from the keyboard or by using “teaching” mode.
- Water quality – embedded recirculation loop ensures stable premium water quality and enables practical elimination of Total Organic Carbon (TOC).
- Low running costs – performance of the deionization and polishing modules is constantly monitored. Monitoring algorithm enables cutting running costs, as replacement of the modules is requested only when service life is close to the end.
- Total organic carbon (TOC) monitor – organic contaminants may not have effect on conductivity of water, so conductivity sensors cannot be used for TOC monitoring. Therefore, a special TOC monitoring module is needed to measure TOC level.
- Color graphic LCD display – system component status is reflected on the display in an intuitive color pattern (Green/Yellow/Red).
- System flowchart – shows all component status and water quality parameters at a glance.
The Labaqua systems include:
- Boost pump
- Pre-filter set
- Reverse osmosis module
- Deionization module
- Final stage polishing module
- 30L storage tank with an integrated Grade 2 dispensing valve
- Recirculation system
Model specific modules:
- Labaqua Trace – Point-of-use microfilter
- Labaqua HPLC – Point-of-use microfilter, TOC monitor
- Labaqua Bio – Point-of-use ultrafilter, UV sterilization module, TOC monitor
Compliance of the system with the technical specification is ensured if the following minimum tap water requirements are followed and the maintenance requirements specified in the user manual are carried out in a timely manner.
- Type of feedwater: Potable
- Minimum pressure: ≥ 0.5 bar
- Maximum pressure: ≤ 5 bar
- Conductivity: <1300 µS/cm
- Temperature: 5 to 35°C
- pH: 4 – 10
- Fouling Index: <10
- Iron: <0.1 ppm as CaCO3
- Aluminum: <0.05 ppm as CaCO3
- Manganese: <0.05 ppm as CaCO3
- Free Chlorine: <1 ppm
- Langerier Saturation Index: <+0.2
- TOC: <2000 ppb
| Ultrapure (Grade 1) water resistivity | 18.2 MΩ x cm |
|---|---|
| Ultrapure (Grade 1) water conductivity | 0.055 μS/cm |
| Pure (Grade 2) water resistivity | 10 MΩ x cm |
| Pure (Grade 2) water conductivity | 0.1 μS/cm |
| TOC | < 5 ppb |
| RNase | < 0.01 ng/ml |
| DNase | < 4 pg/μl |
| Bacteria | < 0.01 CFU/ml |
| Endotoxins | < 0.001 EU/ml |
| Particles > 0.22 μm | < 1/ml |
| Deionization module life (standard module) | 1 m3 |
| Storage tank | 30 l |
| Feed water pressure | 0.5 – 5 bar |
| Feed water conductivity | < 1300 μS/cm |
| Dimensions (W×D×H) | 320×560×620 mm |
| Weight | 26 kg |
| Power consumption | 130 W |
| Nominal operating voltage | 100-240VAC 50/60Hz |
Documentation
| SKU | Product | Type | Language | File |
|---|---|---|---|---|
| Labaqua Bio | Labaqua Bio | Declaration of Conformity | English | Download |
| Labaqua Bio | Labaqua Bio | Brochure | English | Download |
| Labaqua Bio | Labaqua Bio | User Instructions | English | Download |
| Weight | 26 kg |
|---|---|
| Dimensions | 320 × 560 × 620 mm |
| Volume | 30 L, 60 L |
Related Products
TDB-120 is a traditional Biosan’s dry block thermostat for laboratory analysis. Thermostat is designed for maintaining constant temperature of samples in tubes inserted in the aluminium block sockets. Unprecedented high precision and uniformity of temperature over the block. TDB-120 is widely used for PCR–analysis.
This product has multiple variants. The options may be chosen on the product page
Biosan presents the complete line of necessary instrumentation to utilize magnetic bead extraction kits and protocols from various manufacturers and meet the most demanding user requirements.
High–Speed Multi Plate Shaker MPS-1 can be used in virtually any application by providing adjustable mixing of reagents in microtest plates, PCR plates, deepwell plates and test tubes (shaking tubes 0.2 to 2 ml and vortexing any volume up to 50 ml). The shaker is compact and user–friendly. The shaker is ideal for personal use.
This product has multiple variants. The options may be chosen on the product page
Contamination is especially problematic in the highly sensitive PCR technique. Originating from aerosolized fragments, contaminant DNA can lead to cross contamination thus resulting in inaccurate data and as a result misinterpreted analysis.
High-speed mini-centrifuge Microspin 12 Plus is a compact desktop centrifuge designed for biomedical laboratories. Microspin 12 Plus is used for extracting RNA/DNA samples, sedimentation of biological components, biochemical and chemical analysis of microsamples.
The Assist series pipettes are single or 8, 12 channel variable volume pipettes designed to measure and transfer volumes from 0.1 μl to 10000 μl depending on the model.
This product has multiple variants. The options may be chosen on the product page
Thermo–Shaker TS-100C Smart provides intensive mixing and temperature control of samples in microtest tubes or PCR plate. This model of Thermo–Shaker differs from TS-100 with a possibility of cooling samples down to +4°C and with control up to 7 units from PC via Bluetooth® technology.
Reagents for BioMagPure 12 Plus, compact bench-top robotic workstations for automated nucleic acid purification. Usage of pre-filled reagent cartridges and disposable consumables enable a true walk-away automation and high quality nucleic acid extraction solution. Proven magnetic separation technology makes purification efficient, easy to use, reliable, safe and cost effective.
This product has multiple variants. The options may be chosen on the product page
Labaqua ultrapure systems are multi-purpose water purification systems. The Labaqua systems produce ultrapure and pure water directly from tap water.
The BioMagPure 12 Plus consists of compact bench-top robotic workstations for automated nucleic acid purification. Usage of pre-filled reagent cartridges and disposable consumables enable a true walk-away automation and high quality nucleic acid extraction solution. Proven magnetic separation technology makes purification efficient, easy to use, reliable, safe and cost effective.
Labaqua ultrapure systems are multi-purpose water purification systems. The Labaqua systems produce ultrapure and pure water directly from tap water.
The Assist series pipettes with volume lock are single or 8, 12 channel variable volume pipettes designed to measure and transfer volumes from 0.1 μl to 10000 μl depending on the model.
This product has multiple variants. The options may be chosen on the product pageRecently Viewed
Laboratory Furniture
New modular design of laboratory furniture provides flexibility and ease of use.
DNA and RNA Purification
After many years of Combined Centrifuge-Vortex concept success, we are proud to introduce the long awaited Centrifuge/Vortex for PCR plates, CVP-2, to the sample preparation market. The Spin–Mix–Spin technology is intended to spin-down micro volumes of reagents on the well's bottom (first centrifugation spin), following mixing (mix) and spin-down the reagents again from the walls and cap of the well (second spin).
Centrifuge Adapters
For rotors R-6, R-6P, Ri-6, Ri-6P optional insert set (6 pcs) - BI-25-6 for 25 ml conical tubes.
Products Best Selling
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
Products Favourite
Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.
This product has multiple variants. The options may be chosen on the product page
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
Ultrapure water system Labaqua Bio
Labaqua ultrapure systems are multi-purpose water purification systems. The Labaqua systems produce ultrapure and pure water directly from tap water.
