Integral Cold Store Unit

• The cold room is suitable for a variety of applications; it can be used to freeze or refrigerate samples for healthcare, research, agriculture, and biotechnology purposes. In the walk-in cold room (WIC), the interior temperature can be controlled within a range of 2°C to 8°C. In the walk-in freezer (WIF), the temperature is set at -20°C.

Features of the Cold Room

• The set point of the cold room has an adjustable range of 0°C to 10°C (or -15°C to -25°C for the Freezer Room) with a resolution of 0.1°C.

• High-efficiency CFC-free polyurethane insulation foamed into place. With a density of 42kg/m3, a thickness of 100mm and an insulation K-value of 0.22 W/(m2)(K) or better.

• Internal and exterior surfaces are made up of hot-dipped galvanized steel sheet, coated in a white polyester coating. The floor is clad with non-slip material.

• Rooms are equipped with tungsten lighting.

• Rooms are equipped with shelving systems on 3 of their walls.

• Dual refrigeration system – while one system is working, the other one is reserved as a back-up.

• Forced air-cooling system

• Door equipped with a lock and heavy-duty hinges, with an internal safety release.

• CFC-free refrigerant

• Automatic defrosting

• A manual change-over switch is offered as standard, an automatic change-over switch is available as an optional extra.

• Temperature recorder and audible alarm system.

Technical Characteristics of the Refrigerating Unit

• An integrated condenser unit, called Mono block, integrating evaporator, condenser, compressor, electrical control units into one compact body, is used in cold storage rooms with temperature control of

-5°C~5°C or -15°C~-20°C, in medical, clinical, agricultural and chemical industries where large scale cold storage is needed.

• Small compact structure.

• Comprises of TECUMSEH hermetic compressors, hight efficient, in-grooved copper tube and aluminium fin heat exchangers and leading brand refrigeration parts.

• The electronic control boards manage following parameters: automatic temperature setpoint and control,

electric heater defrosting, protection devices for over loading, over-heating, lack of phase, high and low pressure.

• Safe, easy to use and is economical, low cost installation and operation.

Temperature Recorder

• Upper and lower limits +50°C to -30°C

• Accuracy ±1°C

• Resolution ±0.5°C

• Minimum acceptable recording period between chart changes is 7 days

• USB interface is included

 

Model Type Power Supply (V/ph~Hz) Certificate Capacity (m³) Internal Temperature Range Defrost Mod
WIC (10 cbm) Monobloc 220/1N~50 WHO;PQS 10 2-8 Hot gas defrost
WIF (20 cbm) Monobloc 380/3N~50 WHO;PQS 20 -20 Hot gas defrost
WIC (30 cbm) Monobloc 380/3N~50 WHO;PQS 30 2-8 Hot gas defrost
WIC (40 cbm) Monobloc 380/3N~50 WHO;PQS 40 2-8 Hot gas defrost
Combi.40 cbm WIC/WIF Monobloc 380/3N~50 WHO;PQS 25/15 2-8/-20 Hot gas defrost
WIF (20 cbm) Split 380/3N~50 WHO;PQS 20 -20 Electrical heating
WIC (30 cbm) Split 380/3N~50 WHO;PQS 30 2-8 Electrical heating
WIC (40 cbm) Split 380/3N~50 WHO;PQS 40 2-8 Electrical heating

Documentation

SKUProductTypeLanguageFile
FlyerEnglishDownload
Model

Combi.40 cbm WIC/WIF Monobloc, WIC (10 cbm) Monobloc, WIC (30 cbm) Monobloc, WIC (30 cbm) Split, WIC (40 cbm) Monobloc, WIC (40 cbm) Split, WIF (20 cbm) Monobloc, WIF (20 cbm) Split

Related Products

Applicable for storing large quantities of vaccines, reagents, medicines and other biological products. Suitable for CDCs, animal epidemic prevention and control centers, hospitals, biopharmaceutical companies, etc.

This product has multiple variants. The options may be chosen on the product page

Applicable for storage of temperature-sensitive products such as large quantities of vaccines and medicines; National or regional vaccine centers, hospitals, biopharmaceutical and other industries.

Recently Viewed

nSAFE Safety Cabinets

n-SAFE Pro One

Economical variant of the n-SAFE Class II Pro, it maintains essential security but with reduced options. Good for labs on a budget.

This product has multiple variants. The options may be chosen on the product page

CleanTrace™ ALLTEC60 Surface Protein Swabs are a fast and easy way to visually check whether cleaning has been carried out to a satisfactory standard by means of protein detection. By comparing the color of the swab and solution against the label, the user can easily interpret the results for the presence of allergens. Clean-Trace® ALTEC60 Surface Protein (Allergen) Test Swab is validated for a range of allergenic proteins, including egg, milk, gluten, soy, peanut, almond and buckwheat. Refrigeration is not required -swabs can be stored at room temperature (25°C or 77°F). This easy-to-use device requires minimal training. The results are semi-quantitative with four possible color interpretations. The faster the test turns purple and the stronger the color change the higher the level of contamination on a surface Quick detection and confirmation allows immediate corrective action to take place. A visual reading of a color change indicates the level of cleanliness by detecting as little as 3µg of allergen on surfaces and in solution. No instrumentation is required to interpret the sample results. This product is easily integrated into company HACCP programs to monitor for cleaning effectiveness. Its ease of use, reliable detection and fast, visible results can help in teaching staff the importance of cleaning.

Blocks

Block VP-20

20 × ø12 mm round bottom tubes

Pipette Accessories

Volume Knobs

CAPP unique interchangeable adjustable and fixed volume knobs come pre-calibrated and set CAPP pipettes aside from any other liquid handling pipette on the market. They allow users to use one pipette with many fixed volume knobs to substantially reduce cost. Now, instead of four fixed volume pipettes, for example, user can buy one CAPP pipette and four inexpensive knobs to achieve the same precise results.

This product has multiple variants. The options may be chosen on the product page

Sodium dodecyl sulphate; Dodecyl sodium sulfate; Dodecyl sulfate sodium salt; Lauryl sulfate sodium salt; SDS

Blocks

Block B-2PO

Block for one deep-well plate PlateOne® 96/2000 μl

For use in extracting and testing food samples on Neogen item 8505 Reveal 3-D for Gluten. Sold separately from 8505.

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Walk-in Cold/Freezer Room

SKU: N/A Category: Brand:

Haier Biomedical walk-in cold rooms are for storage of vaccines and other temperature sensitive products.

The complete unit is also designed for installations in housed areas such as warehouses to meet specified temperature standards.

These units have been installed in India, Guinea, Syria, Pakistan, Burundi, Zimbabwe and other regions across the world.

Haier Biomedical

Walk-in Cold/Freezer Room
Walk-in Cold/Freezer Room
Select options