Product Features
Both inside and outside of the boxes are made of PP (high strength plastic) material, non-toxic and harmless, safe for direct food contact.
The wall of the box is filled with fluorine-free polyurethane foam insulation material without adding any chemical material, environment-friendly and odor-free.
The body of the unit is designed with handles on both sides to facilitate manual handling & is manufactured with anti-ultraviolet materials.
Equipped with professional sealing ring design, with good heat insulation and refrigeration effect.
| Model | Storage Temperature(℃) | Type | Capacity |
| QBLL0606 | 2-8 | Passive cooling | 6L |
| QBLL0812 | 2-8 | Passive cooling | 12L |
| QBLL0820 | 2-8 | Passive cooling | 20L |
| QBLL0830 | 2-8 | Passive cooling | 30L |
| Model | QBLL0606, QBLL0812, QBLL0820, QBLL0830 |
|---|
Cold chain transportation for samples, reagents, blood products, specimens and drugs.
This product has multiple variants. The options may be chosen on the product page
The virus is high-risk specimen, and if there is collision during the transportation or transmission, there will be a risk of leakage and re-infection. A solution is urgently needed to ensure the viability of the samples and the safety of transport personnel.
This product has multiple variants. The options may be chosen on the product page
· Accurate control of the temperature between 2-10℃ · PCM ice raft · Constant temperature · Complete process with cold chain monitoring · Replace the traditional Insulation method with haier’s transport cooler for transport · Blood from blood transfusion department to clinical blood transfusion poin
This product has multiple variants. The options may be chosen on the product page
Manufactured with vacuum insulation panel insulation technology, stable performance ·Light weight with inlaid clasp, easy to carry ·Smart IoT, check the insulation status at any time (Optional)
This product has multiple variants. The options may be chosen on the product page
This product is applicable for international aviation cold chain transportation of drugs, vaccines, medicines, biological products, raw materials, high-end fresh food and other products which require strict temperature control.
This product is applicable for international aviation cold chain transportation of drugs, vaccines, medicines, biological products, raw materials, high-end fresh food and other products which require strict temperature control.
DC Frequency Conversion Technology DC frequency conversion compressor, superior energy efficiency. Tilt Protection Function Electronic gyroscope in board, effective protection for compressors. Integrated Main Body Rotational molding body better adapted to complex transport environments. Multiple Power Supply Supports AC and DC power.
·Multi-function handle with casters for easy transportation ·Multi dimensional binding of orders and blood, and whole process with cold chain monitoring ·From blood collection vehicle/blood donation house to blood center/blood station from blood center/blood station to hospital
This product has multiple variants. The options may be chosen on the product page
Applicable for cold chain transportation of samples, reagents, blood products, specimens and drugs, especially for the safe transportation of Category A (UN2814, UN2900), Category B (UN3373) infectious substances as well as PCR laboratory testing.
This product has multiple variants. The options may be chosen on the product page
Transport Cooler
Manufactured with vacuum insulation panel insulation technology, stable performance ·Light weight with inlaid clasp, easy to carry ·Smart IoT, check the insulation status at any time (Optional)
This product has multiple variants. The options may be chosen on the product page
Mechanical Pipettes
CAPPAero multichannel pipette has a unique construction, ensuring extremely easy tip mounting and ejection. Both the 8- and 12-channel pipettes have an external ejection lever, assuring ergonomic and effortless tip ejection. This unique construction of CAPP multichannel pipettes enables the thumb to rest under tip ejection and helps to activate the other fingers, considerably reducing the thumb workload. Tip ejection is simply a matter of applying light pressure to the levered ejector arm. Excessive thumb workload by multichannel pipetting is one of the major causes of repetitive strain injuries and user discomfort. Apart from the external ejection lever, the lower part of each 12- and 8-channel pipette is slightly bent in order to eject only 2 tips at a time! This happens so smoothly, as if all 8 or 12 tips were ejected in one take, but this special construction of the lower part distributes the pressure and minimizes the workload. Each tip cone of CAPP multichannel pipettes is made of anodized aluminum and has double O-rings, which all together eliminate the need to ‘hammer’ the pipette into the tips rack to secure the optimal tip mounting. The ‘hammering’ is quite a common issue by multichannel pipetting with many other brands. With CAPP multichannel pipette you only need to apply a slight even pressure to perfectly attach the tips to the nose cones.
This product has multiple variants. The options may be chosen on the product page
Reagents
Congo Red 4B, Cosmos Red, Cotton Red B, Cotton Red C, Direct Red 28, Direct Red R, Direct Red Y
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.
This product has multiple variants. The options may be chosen on the product page
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
The vaccine transport cooler is superior and efficient, having dual capabilities for cold storage and temperature preservation, which is environmentally friendly and energy saving. The performance of the cooler and holdover time of temperature preservation is influenced by the temperature of the stored items.
If you're representing a registered business, you may apply for a Business Account. We look forward to providing your business with a customizable Neoreax experience!
Orbital Shaker-Incubator with cooling ES-20/80C 
