Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.

Rotor type Swing-out
Platform dimensions (w × l) 128 × 85.6 mm
Max. height up to 45 mm
Capacity 2
Max. speed 2000 rpm
Max. RCF: LMC-3000 560 × g
Max. RCF: LMC-4200R 560 × g
Tube manufacturers Nunc, Greiner, Sarstedt, Corning, Greiner Bio-one, etc.
Autoclavable +

Used with

Laboratory bench-top centrifuge with refrigeration LMC-4200R provides temperature control of biomaterial during centrifugation. Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists because it ensures conditions necessary for reproducibility of the sample preparation stage. Temperature control absence at this stage can cause unpredictable results. LMC-4200R is a modern centrifuge designed for operation with microtest plates, gel cards and tubes from 10 to 50 ml.

LMC-3000 is a modern low-speed bench-top centrifuge designed for operation with microtest plates and centrifuge tubes up to 50 ml. This device is widely used in biomedical profile laboratories.

Documentation

SKUProductTypeLanguageFile
BS-010208-AKRotor R-2BrochureEnglishDownload

Related Products

Swing-out rotor for round bottom centrifuge tube.

Rotor for 2 x 8-section 0,2 ml microtube strips.

Rotor for 4 x 8-section 0,2 ml microtube strips * not compatible with Combi-Spins produced before 2015.

Swing-out rotor for round bottom centrifuge tube.

Swing-out rotor for round bottom centrifuge tube.

Rotor for two 8 x 0.2 ml PCR strip rows or 16 individual 0.2 ml PCR tubes.

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Swing-out rotor for conical bottom centrifuge tube. Aluminium buckets.

Swing-out rotor for conical bottom centrifuge tube. Aluminium buckets.

Rotor for 24 Gel Cards for blood group serology testing (Forward Group, Reverse Group, RhD Type and 3 cell antibody screen).

Fixed-angle rotor for 24 - 1.5 or 2 ml microtubes.

Rotor for 8 x 2/1.5 ml and 8 x 0.5 ml microtest tubes.

Recently Viewed

Reagents

GLYCINE AR

Confirms IP,BP,USP specifications

Reagents

NAPHTHALENE AR

White tar; Naphthalin; Camphor tar

Acid blue 1 sodium salt, Disulfin blue VN 150 sodium salt

Repetear Pipettes

CAPPRhythm Stepper Pipette

CAPPRhythm stepper pipette is an ideal basic repeating pipettor offering 45 dispensing volume options and covering the dispensing volumes from 1µL to 5mL. It offers wide compatibility with other brands of repeating pipettor tips. Weighing only 105g, CAPPRhythm repetitive pipette is highly ergonomic and enables single-handed volume selection, loading and dispensing. Its robust design and construction secure minimum maintenance and almost no wear on the spare parts. CAPPRhythm stepper pipette is covered by a one year warranty. Optimize your repetitive pipetting with the CAPP repetitive pipette and discover its benefits firsthand.

This product has multiple variants. The options may be chosen on the product page

MSC-2P is a compact sized digital centrifuge intended to collect droplets, mix reagents and collect once more for improved PCR yield in subsequent analysis. The combination of spin-mix functions ensures fast operation, thorough mixing and repeatable results. Centrifuge rotor can accommodate 2 unskirted or semi-skirted PCR plates at the same time, thus saving time considerably.

Blocks

Block B-2SL

Block for one deep-well plate Starlab® 96/1200 μl

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

Rotor R-2

SKU: BS-010208-AK Category: Brand:

Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.

Biosan

Rotor R-2
Rotor R-2