Rotor for 8 x 2/1.5 ml and 8 x 0.5 ml microtest tubes.

Amount of 2 ml tubes 8
Amount of 1.5 ml tubes 8
Amount of 0.5 ml tubes 8

Used with

Minicentrifuge-vortex Microspin FV-2400 is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories. Micro–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

Minicentrifuge-vortex Combi–Spin FVL-2400N is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories. Combi–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

Minicentrifuge-Vortex Multi–Spin MSC-3000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin).

Minicentrifuge-Vortex Multi–Spin MSC-6000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin).

Documentation

SKUProductTypeLanguageFile
BS-010205-CKRotor R-2/0.5BrochureEnglishDownload

Related Products

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Fixed-angle rotor for 24 - 1.5 or 2 ml microtubes.

Swing-out rotor for round bottom centrifuge tube.

Swing-out rotor for conical bottom centrifuge tube.

Rotor for 12 x 0.5 ml and 12 x 0.2 ml microtest tubes.

Rotor for 12 x 1.5/2 ml microtest tubes.

Bucket rotor without bucket adapters.

Swing-out rotor for conical bottom centrifuge tube.

Rotor for 12 x 1.5/2 ml microtest tubes.

Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.

Rotor for two 8 x 0.2 ml PCR strip rows or 16 individual 0.2 ml PCR tubes.

Recently Viewed

Flat platform with non-slip silicone mat for Petri dishes, culture flasks, agglutination.

Platforms

Platform PV-6/10

Platform for 6 × 10 ml tubes (max diameter 15 mm).

Liquid Nitrogen Storage Solutions

Full Opening CryoBio

It is suitable for the cryopreservation of plasma, cell tissues and various biological samples in hospitals, laboratories, scientific research institutions, disease control and prevention centers, various biobanks and other industry related applications.

This product has multiple variants. The options may be chosen on the product page

Plate Thermo–Shakers are designed for shaking and thermostating 2 standard 96–well microplates.

The Soy Protein Rapid kit is a qualitative immunochromatographic lateral flow test designed for screening for the presence of soy protein residues in food products, ingredients, clean in place (CIP) final rinse water and environmental swabs. A control line assures the test is working properly, and the other two lines outline nondetectable, low, and high levels of soy protein.

nGUARD Fume cupboards

nGUARD Control

Complementary accessory to n-GUARD. Intelligent air flow control and monitoring system.

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Rotor R-2/0.5

SKU: BS-010205-CK Category: Brand:

Rotor for 8 x 2/1.5 ml and 8 x 0.5 ml microtest tubes.

Biosan

Rotor R-2/0.5
Rotor R-2/0.5