Rotor for 12 x 1.5/2 ml microtest tubes.

Amount of 2 ml tubes 12
Amount of 1.5 ml tubes 12

Used with

Minicentrifuge-vortex Combi–Spin FVL-2400N is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories. Combi–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

Minicentrifuge-Vortex Multi–Spin MSC-3000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin).

Minicentrifuge-Vortex Multi–Spin MSC-6000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin).

Documentation

SKUProductTypeLanguageFile
BS-010205-AKRotor R-1.5BrochureEnglishDownload

Related Products

Fixed-angle rotor for 24 - 1.5 or 2 ml microtubes.

Swing-out rotor for conical bottom centrifuge tube.

Rotor for 12 x 0.5 ml and 12 x 0.2 ml microtest tubes.

Bucket rotor without bucket adapters.

Rotor for 8 x 8-section 0,2 ml microtube strips - for any type of strips including paired.

Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.

Swing-out rotor for round bottom centrifuge tube.

Swing-out rotor for conical bottom centrifuge tube.

Rotor for 6x2/1.5 ml + 6x0.5 ml + 6x0.2 ml microtest tubes.

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Rotor for 4 x 8-section 0,2 ml microtube strips * not compatible with Combi-Spins produced before 2015.

Recently Viewed

Magnesium dichloride hexahydrate

Reagents

CAMPHOR M AR

(±)-Camphor, 1,7,7-Trimethylbicyclo[2.2.1]heptan-2-one

Reveal® 3-D for Almond offers results in just 5 minutes and can be used in virtually any environment to screen environmental swabs and clean-in-place rinses. The Reveal 3-D line of food allergen tests kits is uniquely designed to guard against oversaturation and false negative results, with results displayed in three visual lines on the lateral flow test strip. A control line assures the test is working properly, and two other lines outline nondetectable, low, and high levels of almond.

3-Amino-7-dimethylamino-2-methylphenazine hydrochloride, Toluylene red, Basic Red 5

Reveal® for Multi-Treenut Test is intended for the qualitative analysis of treenut (almond, cashew, hazelnut, pecan, pistachio, and walnut) residue in clean-in-place rinses and on environmental surfaces.

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Rotor R-1.5

SKU: BS-010205-AK Category: Brand:

Rotor for 12 x 1.5/2 ml microtest tubes.

Biosan

Rotor R-1.5
Rotor R-1.5