Rotor for 12 x 0.5 ml and 12 x 0.2 ml microtest tubes.

Amount of 0.2 ml tubes 12
Amount of 0.5 ml tubes 12

Used with

Minicentrifuge-vortex Combi–Spin FVL-2400N is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories. Combi–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

Minicentrifuge-Vortex Multi–Spin MSC-3000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin).

Minicentrifuge-Vortex Multi–Spin MSC-6000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin).

Documentation

SKUProductTypeLanguageFile
BS-010205-BKRotor R-0.5/0.2BrochureEnglishDownload

Related Products

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Rotor for 8 x 2/1.5 ml and 8 x 0.5 ml microtest tubes.

Fixed-angle rotor for 24 - 1.5 or 2 ml microtubes.

Swing-out rotor for conical bottom centrifuge tube. Aluminium buckets.

Ø13 mm x 10 sockets, flat bottom, depth 30 mm.

Swing-out rotor for round bottom centrifuge tube.

Rotor for 12 × 0.5 ml and 12 × 0.2 ml microtest tubes.

Swing-out rotor for round bottom centrifuge tube.

Rotor for 4 x 8-section 0,2 ml microtube strips * not compatible with Combi-Spins produced before 2015.

Rotor for 6x2/1.5 ml + 6x0.5 ml + 6x0.2 ml microtest tubes.

Swing-out rotor for round bottom centrifuge tube.

Recently Viewed

Thermo–Shaker TS-100 provides intensive mixing and temperature control of samples in microtest tubes or PCR plate. Functions of heating (up to +100°C) and mixing can be performed both simultaneously and independently.

Freeze Dryer

Freeze Dryer

Applicable to biological research, medical laboratories for drying of biotechnological and pharmaceutical products, e.g. tissues and tissue extracts, bacteria, vaccines, and sera, also suitable to food research, chemical industry and other related scenarios for efficient lyophilization of samples.

This product has multiple variants. The options may be chosen on the product page

Platforms

Clamp FC-500

Clamp 500 ml - Ø105 mm for UP-168

Contains environmental swabs and dropper tips; For use with Veratox and Alert Allergen kits.

This product has multiple variants. The options may be chosen on the product page

Nitric acid silver(I) salt

Aniline green; Basic green 4; Diamond green B; Victoria green B

Nickel(II) nitrate hexahydrate

Microcentrifuges - Vortexes

Microcentrifuge-Vortex Combi-Spin FVL-2400N

Minicentrifuge-vortex Combi–Spin FVL-2400N is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories. Combi–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

Products Best Selling

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Rotor R-0.5/0.2

SKU: BS-010205-BK Category: Brand:

Rotor for 12 x 0.5 ml and 12 x 0.2 ml microtest tubes.

Biosan

Rotor R-0.5/0.2
Rotor R-0.5/0.2