BioQuant-96 is the newest product of Biosan Molecular diagnostic product family.

It has adopted innovative thermoelectric refrigeration technology, brand-new light source and light path design. Detection from the top allows using different consumables – 0,2 tubes, 8-tube strips and semi-skirted and non-skirted 96-well PCR plates. The unique constant current power and 6-zone independent temperature control method ensure more rapid, correct and stable fluorescence quantitative analysis, while maintaining its excellent performance in lowest possible energy consumption.

Device is available in 5-channel configuration. Meanwhile, it has been added with functions including independent temperature control, low temperature storage of sample at 4℃ and FAST mode for more faster cycling (confirm reagent compatibility with fast mode).

BioQuant-96 is comprehensively realizing automatic gain setting and improving user experience.

Specification:

Sample capacity 0.2ml single tube (transparent cap), 96×0.2(0.1)ml Plate (transparent cap), 8-strip tubes (transparent cap)
Dynamic range 1~10^10 copies
Excitation wavelength 300-800 nm
Emission wavelength 500-800 nm
Channels 5
Temperature setting range 4 ~99.9°C (increment: 0.1°C)
Heating/cooling rate Max 6.0 °C/s / 5.5 °C/s
Temperature accuracy ≤±0.1°C
Temperature fluctuation ≤±0.1°C
Temperature uniformity ≤±0.3°C
Temperature control mode Block/6-zone gradient
Sample volume 1 ~ 100 μl
Gradient temperature range Stable and accurate gradient functions of 1 ~ 36°C ensure optimized PCR conditions
Hot-lid temperature range 30 ~110°C (adjustable default: 105°C, Automatic Hot-lid)
Repeatability 5%
Scan mode Full plate simultaneously
Program Max. 20 segments for each program, max. 99 cycles
Continuous operation +
Scan period 5.5 s
Software BioQuant-96 Software
Operating system Windows 7/8/10/11
Software required Microsoft Excel
Minimum PC requirements Built-in touchscreen PC / Memory: 512MB, Hard Disk:10GB, CPU: Pentium® 4, Virtual Memory: ≥1000MB
Nominal operating voltage 100-240V; ~50/60Hz
Power consumption 1000 VA
Dimensions (W×D×H) 490×290×391 mm
Number of sockets USB adapter, Bluetooth adapter
Interface WIN 10 on built-in touchscreen PC
Dimensions 490 × 290 × 391 mm

Related Products

COVID-19 is a single-stranded, positive-sense RNA virus that caused a nationwide outbreak of serious respiratory problems across the world. This RNA virus is capable of person-to-person transmission, spreading very rapidly and afecting almost every country. It is genetically highly related to SARS and MERS coronaviruses.

Recently Viewed

Reagents

1-BUTANOL AR

n-Butyl alcohol, Butan-1-ol

Mechanical Pipettes

CAPPAero 96 Multichannel

CAPPAero multichannel pipette has a unique construction, ensuring extremely easy tip mounting and ejection. Both the 8- and 12-channel pipettes have an external ejection lever, assuring ergonomic and effortless tip ejection. This unique construction of CAPP multichannel pipettes enables the thumb to rest under tip ejection and helps to activate the other fingers, considerably reducing the thumb workload. Tip ejection is simply a matter of applying light pressure to the levered ejector arm. Excessive thumb workload by multichannel pipetting is one of the major causes of repetitive strain injuries and user discomfort. Apart from the external ejection lever, the lower part of each 12- and 8-channel pipette is slightly bent in order to eject only 2 tips at a time! This happens so smoothly, as if all 8 or 12 tips were ejected in one take, but this special construction of the lower part distributes the pressure and minimizes the workload. Each tip cone of CAPP multichannel pipettes is made of anodized aluminum and has double O-rings, which all together eliminate the need to ‘hammer’ the pipette into the tips rack to secure the optimal tip mounting. The ‘hammering’ is quite a common issue by multichannel pipetting with many other brands. With CAPP multichannel pipette you only need to apply a slight even pressure to perfectly attach the tips to the nose cones.

This product has multiple variants. The options may be chosen on the product page

Reagents

ANISALDEHYDE LR

4-Methoxybenzaldehyde, Aubépine

Alum lake of carminic acid, Cochineal, Nacarat, Natural Red 4

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Real-time PCR detection system BioQuant-96

SKU: BS-050110 Category: Brand:

BioQuant-96 is the newest product of Biosan Molecular diagnostic product family.

Biosan

Real-time PCR detection system BioQuant-96
Real-time PCR detection system BioQuant-96