Platform with clamps for flasks.

Working area 250 × 190 mm
Flask volume 250-300 ml
Number of clamps 6

Used with

COâ‚‚ Shaker CPS-20 provides regulated orbital motion of the platform and is designed for use specifically in COâ‚‚ incubators. CPS-20 is specifically designed for use in harsh environments such as COâ‚‚ and humidity and provides reproducible results for cell culture growth. A choice of 5 interchangeable platforms provides the possibility of performing various procedures and techniques in various cultivation vessels.

Shaker PSU-10i provides regulated orbital motion of the platform and is designed for use both in small specialized biotechnological laboratories and in large multidisciplinary laboratories: a choice of five (5) interchangeable platforms provides the possibility of performing various procedures and techniques.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Documentation

SKUProductTypeLanguageFile
BS-010108-DKPlatform P-6/250BrochureEnglishDownload

Related Products

Flat platform with non-slip rubber mat can accommodate various low profile containers.

Universal platform with clamps can accommodate flasks or bottles of different volume sizes. Clamps are not included with platform and need to be ordered separately.

Platform with clamps for flasks.

Clamp 2000 ml - Ø165 mm for UP-168

Convenient alternative to traditional steel holders, an easy way to fix tubes, plates, flasks and other laboratory wares on platforms for cultivation, incubation and mixing.

Platform with clamps for flasks.

Flat platform with non-slip rubber mat can accommodate various low profile containers.

Platform for 96 tubes 0.2 ml or semi-/ unskirted PCR plate.

Adjustable angle test tube rack for UP-168

For 24 tubes 0.5 ml and 48 tubes 0.2 ml.

Convenient alternative to traditional steel holders, an easy way to fix tubes, plates, flasks and other laboratory wares on platforms for cultivation, incubation and mixing.

Recently Viewed

Platform with tight fit clamps for flasks.

2-Hydroxy-1,2,3-propanetricarboxylic acid monohydrate

Automated Solution for Medication Dispensing

Full Automatic Tablet/Capsule Packaging System

Used to pack single-dose tablets and capsules into one pill pouch according to physician prescription. Patient information and use directions will be printed on the pill pouch, which makes it easy to review and verify

Veratox for Gliadin is used for the quantitative analysis of prolamins (wheat gliadin, rye secalin, and barley hordein) in ingredients, environmental surfaces, clean-in-place rinses, and finished food products intended to be prolamins (gluten) free. Can also be used to screen environmental swabs.

Grant SBB series boiling baths are reliable, high quality unstirred boiling baths for direct immersion of samples. They provide continuous, steady 100°C operation without violent boiling, spitting or producing excessive steam.

This product has multiple variants. The options may be chosen on the product page

Water Purification Systems

Ultrapure water system Labaqua HPLC

Labaqua ultrapure systems are multi-purpose water purification systems. The Labaqua systems produce ultrapure and pure water directly from tap water.

Yttrium(III) oxide; Yttria, diyttrium trioxide, yttrium sesquioxide

Reagents

ACETONE AR

Propanone; Dimethyl Ketone

Ammonium heptamolybdate tetrahydrate, Molybdic acid ammonium salt tetrahydrate

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

Platform P-6/250

SKU: BS-010108-DK Category: Brand:

Platform with clamps for flasks.

Biosan

Platform P-6/250
Platform P-6/250