Platform with clamps for flasks.

Working area 250 × 190 mm
Flask volume 250-300 ml
Number of clamps 6

Used with

CO₂ Shaker CPS-20 provides regulated orbital motion of the platform and is designed for use specifically in CO₂ incubators. CPS-20 is specifically designed for use in harsh environments such as CO₂ and humidity and provides reproducible results for cell culture growth. A choice of 5 interchangeable platforms provides the possibility of performing various procedures and techniques in various cultivation vessels.

Shaker PSU-10i provides regulated orbital motion of the platform and is designed for use both in small specialized biotechnological laboratories and in large multidisciplinary laboratories: a choice of five (5) interchangeable platforms provides the possibility of performing various procedures and techniques.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Documentation

SKUProductTypeLanguageFile
BS-010108-DKPlatform P-6/250BrochureEnglishDownload

Related Products

Universal platform with adjustable bars can accommodate laboratory glassware of different shapes.

Flat platform with non-slip silicone mat for Petri dishes, culture flasks, agglutination.

Flat platform with non-slip rubber mat can accommodate various low profile containers.

Platform for 96 tubes 0.2 ml or semi-/ unskirted PCR plate.

Additional holding bar for UP-12

Platform with clamps for flasks.

Convenient alternative to traditional steel holders, an easy way to fix tubes, plates, flasks and other laboratory wares on platforms for cultivation, incubation and mixing.

For 24 tubes 0.5 ml and 48 tubes 0.2 ml.

Flat platform with non-slip rubber mat can accommodate various low profile containers.

Universal platform with clamps can accommodate flasks or bottles of different volume sizes. Clamps are not included with platform and need to be ordered separately.

Recently Viewed

Stirrer Accessories

Support rod and base SRB

Support rod and base for device mounting.

(R,R)-3,3'-Dithiobis(2-aminopropionicacid)

Cold and Freezer Rooms

Walk-in Cold/Freezer Room

Haier Biomedical walk-in cold rooms are for storage of vaccines and other temperature sensitive products. The complete unit is also designed for installations in housed areas such as warehouses to meet specified temperature standards. These units have been installed in India, Guinea, Syria, Pakistan, Burundi, Zimbabwe and other regions across the world.

This product has multiple variants. The options may be chosen on the product page

This additive is used in conjunction with Veratox for Gliadin and Alert for Gliadin in evaluating samples containing high levels of tannins, cocoa or dark chocolate.

1-ß-D-Ribofuranosyluracil, Uracil-1-ß-D-ribofuranoside

The Gluten Protein Rapid kit is a qualitative immunochromatographic lateral flow test designed for screening for the presence of gluten protein residues in food products, ingredients, clean in place (CIP) final rinse water and environmental swabs. Positive results are visualized by the presence of two lines; the test line and the control line, when gluten protein is present.

THF; Butylene Oxide; Cyclotetramethylene oxide; 1,4-Epoxybutane

Products Best Selling

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

A-12, adapter for work with tubes which are 12 mm in external diameter.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Products Favourite

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

Platform P-6/250

SKU: BS-010108-DK Category: Brand:

Platform with clamps for flasks.

Biosan

Platform P-6/250
Platform P-6/250