Assistboy pipette controller is a device intended for pipetting liquids with the use of measuring pipettes. It can work with all types of glass or plastic serological pipettes in the volume range from 0.5 ml to 100 ml.
Two dispense modes permit selection of dispensing intensity depending on the user’s needs. The selected setting of the pipette controller mode is shown on the display.

SAFE AND EFFICIENT WORK

  • Protected by a PTFE filter blocking any liquid from entering the unit
  • Autoclavable filter, the pipette holder and the nosepiece
  • UV resistant body for safe sterilization
  • Powerful, environmentally friendly Ni-MH rechargeable battery enable many hours of continuous work
  • LCD display showing battery charge level

SPEED AND WORKING MODE ADJUSTMENT

  • Function buttons for SPEED and working MODE control in a reach of a thumb
  • Additional speed adjustment by the pressure applied to the trigger buttons

WORKING COMFORT

  • Suitable for glass & plastic volumetric (serological) pipettes 0.5-100 ml
  • Ergonomically shaped handle
  • Well located function buttons
  • Convenient charging stand

Related Products

CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds.

CAPPTempo motorized pipette controller enables you to aspirate the required volume in a fast and precise way thanks to the unique, patented Electronic Brake System (EBS). When activated, the EBS allows you to start filling the pipette at the maximum speed and once you come closer to the desired volume, the system will switch to the minimum speed just by one single click, allowing you to aspirate exactly the volume required.

This product has multiple variants. The options may be chosen on the product page

Recently Viewed

Blocks

Block B-05PO

Block for one deep-well plate PlateOne® 96/500 μl

a-D-Glucopyranosyl ß-D-fructofuranoside; ß-D-Fructofuranosyl-a-D-glucopyranosid;, D(+)-Saccharose; Sugar

Centrifuges

Mini-Centrifuge

This product is used in micro centrifugal scenarios (single tube capacity is less than or equal to 2ml)

This product has multiple variants. The options may be chosen on the product page

Laboratory Furniture

Drawer unit LF-1

New modular design of laboratory furniture provides flexibility and ease of use.

For use with the BioKits BLG, Egg, Peanut and Walnut kits.

Biological Safety Cabinet

NSF Series Biological Safety Cabinet

Professional air purification equipment suitable for pharmaceuticals, medical and health industries, scientific research laboratories of universities and colleges as well as other related fields.

This product has multiple variants. The options may be chosen on the product page

2,3-Butanedione monoxime; BDM; Biacetyl monoxime

Sodium tetraborate decahydrate; Borax decahydrate; Sodium borate decahydrate

Biological Safety Cabinet

Standard Biosafety Cabinet-Dual HEPA

Energy efficient Class II microbiological safety cabinet with two DC fans, dual exhaust HEPAs and long lasting LED lights. Suitable for microbiology, biomedicine, biosafety laboratories and other laboratories. It offers three levels of protection – operator, product and environment.

This product has multiple variants. The options may be chosen on the product page

Products Best Selling

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Products Favourite

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Pipette controller Assistboy

SKU: BS-010521 Category: Brand:

Assistboy pipette controller is a device intended for pipetting liquids with the use of measuring pipettes. It can work with all types of glass or plastic serological pipettes in the volume range from 0.5 ml to 100 ml.
Two dispense modes permit selection of dispensing intensity depending on the user’s needs. The selected setting of the pipette controller mode is shown on the display.

Biosan

Pipette controller Assistboy
Pipette controller Assistboy