Verification instrument OD Plate 
Laboratory bench-top centrifuge with refrigeration LMC-4200R provides temperature control of biomaterial during centrifugation. Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists because it ensures conditions necessary for reproducibility of the sample preparation stage. Temperature control absence at this stage can cause unpredictable results.
LMC-4200R is a modern centrifuge designed for operation with microtest plates, gel cards and tubes from 10 to 50 ml.
Features:
- Soft start and run-down of the rotor;
- Efficient rate of chamber refrigeration: under 10 min;
- Maintenance of stable temperature during operation;
- User-friendly setting of centrifugation parameters (speed, temperature, time) and simultaneous display of both set and actual values;
- Safe operation is provided by a metal protection chamber and a case cover, automatic stop at imbalance (emergency shutdown, “IMBALANCE” displayed) and a lock keeping the lid closed while the centrifuge is running.
- Rotor selection;
- Setting rotor speed in RPM or RCF;
- Multiple acceleration (Slow, Normal, Fast) and deceleration (0, Slow, Normal, Fast) modes and possibility to switch off forced braking;
- Low noise level;
- Wide choice of accessory rotors.
| Temperature control range | –10°C ... +25°C |
|---|---|
| Stable temperature maintenance range | 25°C below ambient ... to +25°C |
| Temperature setting resolution | 1°C |
| Speed regulation range for centrifuge tubes | 100–4200 rpm (3160 × g) |
| Speed regulation range for microtitre plates | 100-2000 rpm (560 × g) |
| Speed setting resolution | 100 rpm |
| Digital time setting | 1 - 90 min (increment 1 min) |
| Timer sound signal | + |
| Rotor imbalance diagnostics (automatic stop, “IMBALANCE” warning) | + |
| Display | LCD, 2 lines |
| Chamber diameter | 360 mm |
| Overall dimensions (W×D×H) | 635x580x335 mm |
| Weight | 56 kg |
| Nominal operating voltage | 230 V, 50 Hz |
| Power consumption (230V / 120 V) | 990 W (4.3 A) / - |
Accessories
2 adapters for 96-well semi-skirted and non-skirted PCR plates - made of Ertacetal® C. Autoclavable.
For rotors R-6, R-6P, Ri-6, Ri-6P optional insert set (6 pcs) - BI-25-6 for 25 ml conical tubes.
For rotors R-12/10, Ri-12/10 optional adapter set (12 pcs) - BN-13/75 for vacutainers 2-5 ml [13x75].
For rotors R-12/10, Ri-12/10 optional adapter set (12 pcs) - BN-13/100 for vacutainers 4-8 ml [13x100].
For rotors R-12/10, Ri-12/10 optional adapter set (12 pcs) - BN-16/100 for vacutainers 8-10 ml [16x100].
Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.
Rotor for 24 Gel Cards for blood group serology testing (Forward Group, Reverse Group, RhD Type and 3 cell antibody screen).
For rotors R-24/10, Ri-24/10 optional adapter set (24 pcs) - BN-13/75-24 for vacutainers 2-5 ml [13x75].
For rotors R-24/10, Ri-24/10 optional adapter set (24 pcs) - BN-13/100-24 for vacutainers 4-8 ml [13x100].
For rotors R-24/10, Ri-24/10 optional adapter set (24 pcs) - BN-16/100-24 for vacutainers 8-10 ml [16x100].
Documentation
| SKU | Product | Type | Language | File |
|---|---|---|---|---|
| Rotor selection guide | Rotor selection guide | Flyer | English | Download |
| LMC-4200R | LMC-4200R | Declaration of Conformity | English | Download |
| LMC-4200R | LMC-4200R | Brochure | English | Download |
| LMC-4200R | LMC-4200R | User Instructions | English | Download |
General Documents
| Type | Name | Language | File |
|---|---|---|---|
| Catalogue | English | Download |
| Weight | 56 kg |
|---|---|
| Dimensions | 655 × 580 × 335 mm |
| Product class | Premium |
Related Products
High-speed mini-centrifuge Microspin 12 Plus is a compact desktop centrifuge designed for biomedical laboratories. Microspin 12 Plus is used for extracting RNA/DNA samples, sedimentation of biological components, biochemical and chemical analysis of microsamples.
Haier Biomedical LX-210L750R is a floor-standing highspeed refrigerated centrifuge features with 3L capacity and performance up to 47,400 x g, which is ideal for all-purpose use in the industrial and research sectors.
Specifically designed for use in blood banks and transfusion facilities.Widely applied in biopharmaceuticals, cell therapy, biological culture, vaccine production, universities and other related fields.
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
This product has multiple variants. The options may be chosen on the product page
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
LMC-56 is a modern benchtop, low-speed laboratory centrifuge designed for convenient sedimentation, centrifugation and collection of necessary samples. It provides operation with tubes, blood collection systems, gel cards, microtest and ELISA plates. Our centrifuges are designed for safe work (metal protecting housing), easy maintenance and wide application range in medical, biochemical, chemical, industrial and other type of laboratories.
Low speed, non-refrigerated centrifuge suitable for the routine separation of particles and ideal for the analysis of blood and other biological samples. For lowmedium throughput applications, for use with 15ml, 50ml and 100ml round and conical centrifuges tubes.
This product has multiple variants. The options may be chosen on the product page
Haier Biomedical LX-100L1000R is a conventional centrifuge designed for biopharmaceuticals with large capacity 6L, which is widely used in fields such as biopharmaceuticals and academic research. It plays an important role in the processes of protein collection, separation, and purification for samples like macromolecular proteins and bacteria.
This product is used in micro centrifugal scenarios (single tube capacity is less than or equal to 2ml)
This product has multiple variants. The options may be chosen on the product page
LMC-3000 is a modern low-speed bench-top centrifuge designed for operation with microtest plates and centrifuge tubes up to 50 ml. This device is widely used in biomedical profile laboratories.
High-speed mini-centrifuge Microspin 12 is a compact desktop centrifuge designed for biomedical laboratories. Microspin 12 is used for extracting RNA/DNA samples, sedimentation of biological components, biochemical and chemical analysis of microsamples.
Recently Viewed
ULT Freezers
Haier Biomedical Salvum brand of ULT freezers has been designed to deliver energy savings and reduced carbon footprint. This range uses environmentally safe hydrocarbon refrigerants and high efficiency fan motors to maximize the cooling ability of the system and reduce energy consumption. While providing sample safety, the freezer design makes energy savings possible for laboratories.
This product has multiple variants. The options may be chosen on the product page
Reagents
2-Amino-1-methyl-2-imidazolin-4-one, 2-Imino-1-methylimidazolidin-4-one, 2-Imino-N-methylhydantoin
Mechanical Pipettes
CAPPAero multichannel pipette has a unique construction, ensuring extremely easy tip mounting and ejection. Both the 8- and 12-channel pipettes have an external ejection lever, assuring ergonomic and effortless tip ejection. This unique construction of CAPP multichannel pipettes enables the thumb to rest under tip ejection and helps to activate the other fingers, considerably reducing the thumb workload. Tip ejection is simply a matter of applying light pressure to the levered ejector arm. Excessive thumb workload by multichannel pipetting is one of the major causes of repetitive strain injuries and user discomfort. Apart from the external ejection lever, the lower part of each 12- and 8-channel pipette is slightly bent in order to eject only 2 tips at a time! This happens so smoothly, as if all 8 or 12 tips were ejected in one take, but this special construction of the lower part distributes the pressure and minimizes the workload. Each tip cone of CAPP multichannel pipettes is made of anodized aluminum and has double O-rings, which all together eliminate the need to ‘hammer’ the pipette into the tips rack to secure the optimal tip mounting. The ‘hammering’ is quite a common issue by multichannel pipetting with many other brands. With CAPP multichannel pipette you only need to apply a slight even pressure to perfectly attach the tips to the nose cones.
This product has multiple variants. The options may be chosen on the product page
CleanTrace™ ALLTEC60 Surface Protein Swabs are a fast and easy way to visually check whether cleaning has been carried out to a satisfactory standard by means of protein detection. By comparing the color of the swab and solution against the label, the user can easily interpret the results for the presence of allergens. Clean-Trace® ALTEC60 Surface Protein (Allergen) Test Swab is validated for a range of allergenic proteins, including egg, milk, gluten, soy, peanut, almond and buckwheat. Refrigeration is not required -swabs can be stored at room temperature (25°C or 77°F). This easy-to-use device requires minimal training. The results are semi-quantitative with four possible color interpretations. The faster the test turns purple and the stronger the color change the higher the level of contamination on a surface Quick detection and confirmation allows immediate corrective action to take place. A visual reading of a color change indicates the level of cleanliness by detecting as little as 3µg of allergen on surfaces and in solution. No instrumentation is required to interpret the sample results. This product is easily integrated into company HACCP programs to monitor for cleaning effectiveness. Its ease of use, reliable detection and fast, visible results can help in teaching staff the importance of cleaning.
Products Best Selling
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
Products Favourite
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.
This product has multiple variants. The options may be chosen on the product pageRefrigerated Laboratory Centrifuge LMC-4200R
Laboratory bench-top centrifuge with refrigeration LMC-4200R provides temperature control of biomaterial during centrifugation. Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists because it ensures conditions necessary for reproducibility of the sample preparation stage. Temperature control absence at this stage can cause unpredictable results. LMC-4200R is a modern centrifuge designed for operation with microtest plates, gel cards and tubes from 10 to 50 ml.
