CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds. Fully adjustable speed-setting as well as gravity delivery and blow-out dispensing modes are available. Exchangeable 0.2 μm PTFE disc filter acts as shutdown system if overfill occurs. The exchangeable pipette holders are made of silicon and accommodate glass or plastic pipettes ranging from 0.1ml to 100ml. Vapour outlet for venting out corrosive liquids or fumes. Fully autoclavable nose cone and UV-resistant housing. Complies with CE and RoHS.

Related Products

Assistboy pipette controller is a device intended for pipetting liquids with the use of measuring pipettes. It can work with all types of glass or plastic serological pipettes in the volume range from 0.5 ml to 100 ml. Two dispense modes permit selection of dispensing intensity depending on the user's needs. The selected setting of the pipette controller mode is shown on the display.

CAPPTempo motorized pipette controller enables you to aspirate the required volume in a fast and precise way thanks to the unique, patented Electronic Brake System (EBS). When activated, the EBS allows you to start filling the pipette at the maximum speed and once you come closer to the desired volume, the system will switch to the minimum speed just by one single click, allowing you to aspirate exactly the volume required.

This product has multiple variants. The options may be chosen on the product page

Recently Viewed

CleanTrace™ ALLTEC60 Surface Protein Swabs are a fast and easy way to visually check whether cleaning has been carried out to a satisfactory standard by means of protein detection. By comparing the color of the swab and solution against the label, the user can easily interpret the results for the presence of allergens. Clean-Trace® ALTEC60 Surface Protein (Allergen) Test Swab is validated for a range of allergenic proteins, including egg, milk, gluten, soy, peanut, almond and buckwheat. Refrigeration is not required -swabs can be stored at room temperature (25°C or 77°F). This easy-to-use device requires minimal training. The results are semi-quantitative with four possible color interpretations. The faster the test turns purple and the stronger the color change the higher the level of contamination on a surface Quick detection and confirmation allows immediate corrective action to take place. A visual reading of a color change indicates the level of cleanliness by detecting as little as 3µg of allergen on surfaces and in solution. No instrumentation is required to interpret the sample results. This product is easily integrated into company HACCP programs to monitor for cleaning effectiveness. Its ease of use, reliable detection and fast, visible results can help in teaching staff the importance of cleaning.

L-3-(4-Hydroxyphenyl) alanine disodium salt hydrate

Photometers and Densitometers

Densitometer DEN-1

Densitometer is designed for measurement of cell suspension's turbidity in the range of 0.0–6.0 McFarland units (0 – 180 × 107 cells/ml).

Neogen’s new Reveal 3-D Food Buffer expands the capabilities of select Reveal 3-D products to include testing of food products and ingredients. This qualitative method utilizes this buffer, a representative sampling protocol, and a simple procedure to detect low levels of allergen residues in foods. This method can be applied across a wide variety of product types and gives rapid results, facilitating decision making and enhancing manufacturing efficiencies. The Reveal 3-D for Food Buffer is for use with the following Neogen® Reveal 3-D products (Almond, Coconut, Egg, Hazelnut, Peanut, and Soy). Please consult respective product kit insert for procedure details.

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Veratox® for Sesame is used for the quantitative analysis of sesame residue in food products such as spices, bakery products, cereal products, and clean-in-place rinses. It can also be used to screen environmental swabs.

Automated Solution for Medication Dispensing

Automatic Sorting System

The automatic sorting system used in hospital PIVAS (Pharmacy Intravenous Admixture Services) can effectively improve the accuracy of drug dispensing, reduce work intensity, increase work efficiency, ensure medication safety, and enhance pharmaceutical services and hospital management.

Products Best Selling

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

CAPPController Pipette

SKU: PA-100 Category: Brand:

CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds.

CAPP

CAPPController Pipette
CAPPController Pipette