CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds. Fully adjustable speed-setting as well as gravity delivery and blow-out dispensing modes are available. Exchangeable 0.2 μm PTFE disc filter acts as shutdown system if overfill occurs. The exchangeable pipette holders are made of silicon and accommodate glass or plastic pipettes ranging from 0.1ml to 100ml. Vapour outlet for venting out corrosive liquids or fumes. Fully autoclavable nose cone and UV-resistant housing. Complies with CE and RoHS.

Related Products

CAPPTempo motorized pipette controller enables you to aspirate the required volume in a fast and precise way thanks to the unique, patented Electronic Brake System (EBS). When activated, the EBS allows you to start filling the pipette at the maximum speed and once you come closer to the desired volume, the system will switch to the minimum speed just by one single click, allowing you to aspirate exactly the volume required.

This product has multiple variants. The options may be chosen on the product page

Assistboy pipette controller is a device intended for pipetting liquids with the use of measuring pipettes. It can work with all types of glass or plastic serological pipettes in the volume range from 0.5 ml to 100 ml. Two dispense modes permit selection of dispensing intensity depending on the user's needs. The selected setting of the pipette controller mode is shown on the display.

Recently Viewed

Reagents

ALUMINON AR

Tri-ammonium aurine tricarboxylate, ATA, Aluminon, Ammonium aurintricarboxylate

24 х 1.5 ml microtubes

Rotors

Rotor SR-16

Rotor for 2 x 8-section 0,2 ml microtube strips.

Reagents

N-HEXANE 99% AR

Hexane; Hexyl Hydride;

Thermo–Shaker TS-100C Smart provides intensive mixing and temperature control of samples in microtest tubes or PCR plate. This model of Thermo–Shaker differs from TS-100 with a possibility of cooling samples down to +4°C and with control up to 7 units from PC via Bluetooth® technology.

Laboratory Refrigerator

Laboratory Refrigerator

Typical Installation Used to store chemicals, reagents and consumables within laboratories and research facilities.  

Logger

4 CHW Logger

4-channel washing solution weight logger, 4 CHW Logger provides automatic control of rinsing solution and waste volumes.

Trisodium orthophosphate dodecahydrate; Sodium phosphate tribasic dodecahydrate; Trisodium phosphate dodecahydrate; TSP do

Platforms

Clamp HSC-50

Tight fit clamp 50 ml - Ø50 mm for UP-168

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

CAPPController Pipette

SKU: PA-100 Category: Brand:

CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds.

CAPP

CAPPController Pipette
CAPPController Pipette