-
×
HYDROCHLORIC ACID 1M (1N) STANDARDIZED SOLUTION traceable to NIST
-
×
BALSAM CANADA (SYNTHETIC)
-
×
ETHYLENE DIAMINE TETRA ACETIC ACID DISODIUM SALT AR
-
×
IODINE RESUBLIMED AR
-
×
Solar Direct Drive Blood Refrigerator
-
×
URIDINE FOR BIOCHEMISTRY
-
×
POLYETHYLENE GLYCOL 400 FOR SYNTHESIS
-
×
ACETONE GPR (LR)
-
×
DURHAM DIAM 7 MM
-
×
D-FRUCTOSE AR
-
×
Calibration kit 12mm
-
×
CHROMIUM (III) CHLORIDE HEXAHYDRATE LR
CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds. Fully adjustable speed-setting as well as gravity delivery and blow-out dispensing modes are available. Exchangeable 0.2 μm PTFE disc filter acts as shutdown system if overfill occurs. The exchangeable pipette holders are made of silicon and accommodate glass or plastic pipettes ranging from 0.1ml to 100ml. Vapour outlet for venting out corrosive liquids or fumes. Fully autoclavable nose cone and UV-resistant housing. Complies with CE and RoHS.
Related Products
Assistboy pipette controller is a device intended for pipetting liquids with the use of measuring pipettes. It can work with all types of glass or plastic serological pipettes in the volume range from 0.5 ml to 100 ml. Two dispense modes permit selection of dispensing intensity depending on the user's needs. The selected setting of the pipette controller mode is shown on the display.
CAPPTempo motorized pipette controller enables you to aspirate the required volume in a fast and precise way thanks to the unique, patented Electronic Brake System (EBS). When activated, the EBS allows you to start filling the pipette at the maximum speed and once you come closer to the desired volume, the system will switch to the minimum speed just by one single click, allowing you to aspirate exactly the volume required.
This product has multiple variants. The options may be chosen on the product pageRecently Viewed
Rotors
Rotor for 4 x 8-section 0,2 ml microtube strips * not compatible with Combi-Spins produced before 2015.
Reagents
Nickel ammonium sulphate, Di-ammonium nickel sulphate hexahydrate
Microcentrifuges - Vortexes
Minicentrifuge-Vortex Multi–Spin MSC-6000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the reagents again from the walls and cap of the microtube (second spin).
Mechanical Pipettes
CAPP Microbiology Pipette is an ideal straw pipette for viscous liquids. Perfect for microbiology tests in the food industry, CAPP microbiology pipette is supplied with three fixed volume knobs at 100µl, 900µl and 1000µl and has a modified tip cone suited for use with a sterile extended length straw. With CAPP straw pipette, you will be able to easily reach and pipette viscous liquids such as milk, cream, yoghurt and cosmetics. Contact us for a free trial pipette and experience yourself how to pipette viscous liquids effortlessly and precisely. Protocols involving dilution of 1:10 will be done easily with CAPP microbiology pipette. Except for the detachable fixed volume knobs, CAPP straw pipette is fully autoclavable and requires no disassembly before autoclaving.
This product has multiple variants. The options may be chosen on the product pageProducts Best Selling
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
Products Favourite
Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.
This product has multiple variants. The options may be chosen on the product page
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
CAPPController Pipette
CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds.
