CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds. Fully adjustable speed-setting as well as gravity delivery and blow-out dispensing modes are available. Exchangeable 0.2 μm PTFE disc filter acts as shutdown system if overfill occurs. The exchangeable pipette holders are made of silicon and accommodate glass or plastic pipettes ranging from 0.1ml to 100ml. Vapour outlet for venting out corrosive liquids or fumes. Fully autoclavable nose cone and UV-resistant housing. Complies with CE and RoHS.

Related Products

CAPPTempo motorized pipette controller enables you to aspirate the required volume in a fast and precise way thanks to the unique, patented Electronic Brake System (EBS). When activated, the EBS allows you to start filling the pipette at the maximum speed and once you come closer to the desired volume, the system will switch to the minimum speed just by one single click, allowing you to aspirate exactly the volume required.

This product has multiple variants. The options may be chosen on the product page

Assistboy pipette controller is a device intended for pipetting liquids with the use of measuring pipettes. It can work with all types of glass or plastic serological pipettes in the volume range from 0.5 ml to 100 ml. Two dispense modes permit selection of dispensing intensity depending on the user's needs. The selected setting of the pipette controller mode is shown on the display.

Recently Viewed

Automated Solution for Medication Dispensing

Intelligent Dispensing System

Used for smart storage for pick up of medications in hospital pharmacies. It can be connectedwith the HIS (hospital information system) so that pharmacists canmanage dispensing corresponding medications according to physicians order.

Rockers, Shakers and Rotators

Programmable rotator Multi RS-60

Programmable Rotator Multi RS-60 performs several motion types in one module. Microprocessor control allows performing not only Vertical rotation (1) of the platform, but also Reciprocal rotation (2) as well as Vibration (3). These three motion types can be performed separately,  pairwise and in cycles, periodically repeating the sequence of three motion types.

(S)-2,5-Diaminopentanoic acid monohydrochloride

The Pecan Protein Rapid kit is a qualitative immunochromatographic lateral flow test designed for screening for the presence of pecan protein residues in food products, ingredients, clean in place (CIP) final rinse water and environmental swabs. A control line assures the test is working properly, and the other two lines outline nondetectable, low, and high levels of pecan protein.

Consumables

Centrifuge Tubes

With the tube body made of medical-grade polypropylene and the tube cover made of medical-grade polyethylene, the tubes conform to the USP Class-6 standard; 15ml /50ml conical bottom design, high clarity, black clear scale line on the tube body, and a preset white writing area; Double threaded tube cover, easy to grip for single-handed operation and reliable sealing; Flat cover design; the cover top can be used as a sample information marking area; RNase, DNase Free; Sterilized by gamma rays; sterile and pyrogen-free; Various packaging methods, including sterile racked packing, sterile bag-packed bulk packing, and non-sterile packing, are available.

This product has multiple variants. The options may be chosen on the product page

Water Bath Racks

Rack TR-16/19

Test tube rack for ø16 to ø19mm tubes, capacity 16 tubes. WxDxH: 155x90x112mm.

Pipette Controllers

CAPPController Pipette

CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds.

Dehydrated Media and Bases

EC BROTH

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

CAPPController Pipette

SKU: PA-100 Category: Brand:

CAPPController is light and fatigue free: weighs only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. CAPPController can be charged while using. It’s a powerful instrument, filling a 50mL pipette in less than 10 seconds.

CAPP

CAPPController Pipette
CAPPController Pipette