-
×
ACRYLIC ACID FOR SYNTHESIS
-
×
COPPER (II) CHLORIDE ANHYDROUS AR
-
×
NITRIC ACID 69-71% AR
-
×
ACETONITRILE MSChrom For LC-MS Analysis
-
×
ACETIC ACID 1M (1N) STANDARDIZED SOLUTION traceable to NIST
-
×
PROPIONIC ANHYDRIDE FOR SYNTHESIS
-
×
Adapter set (2 pcs) - AP-96
-
×
Block SC-18/02C
-
×
MAYER'S SOLUTION
-
×
ETHYL ACETATE AR
-
×
L-LEUCINE 99% LR
Ingredients: gms/lit.
Peptone (meat or casein) 1.00
Sodium chloride 4.30
Disodium hydrogen phosphate dihydrate 7.23
Potassium dihydrogen phosphate 3.60
Final pH (at 25°C) : 7.0 + 0.2
Directions :
Suspend 14.64 grams (the equivalent weight of dehydrated medium per litre) in 1000 ml purified /distilled water. Heat if necessary, to dissolve the medium completely. For preparation of nonfatty products insoluble in water, add 0.1 % w/v Polysorbate 80 to assist the suspension of poorly wettable substances. Dispense in tubes or flasks or as desired and sterilize by autoclaving at 15 lbs pressure 121°C for 15 minutes or as per validated cycle.
Principle :
Buffered Peptone Water is a pre-enrichment medium designed to help recovery of sub-lethally damaged Salmonellae before transfer to a selective medium. This pre-enrichment medium is free from inhibitors and is well buffered and provides conditions for resuscitation of the cells that have been injured by processes of food preservation. Pre-enrichment in Buffered Peptone Water at 37°C for 18 hours before selection in Tetrathionate Brilliant Green Bile Broth showed superior results compared with direct selection method. The composition of Buffered Peptone Water with NaCl medium is as per IP and EP specifications recommended to dilute the sample for microbial examination. Depending on the amount of fat in the sample to examine the kind and quantity of emulsifying agent to be used. These pre-enrichment media contain peptone as a source of carbon, nitrogen, vitamins and minerals. Sodium chloride maintains the osmotic balance and phosphates buffer the medium. The broth is rich in nutrients and produces high resuscitation rates for sub-lethally injured bacteria and supports intense growth. The phosphate buffer system prevents bacterial damage due to changes in the pH of the medium.
| Packing | 500 G |
|---|
Related Products
Recently Viewed
Reagents
Ammonium heptamolybdate tetrahydrate, Molybdic acid ammonium salt tetrahydrate
Allergens
Reveal® 3-D for Mustard offers results in just 5 minutes and can be used in virtually any environment to screen environmental swabs and clean-in-place rinses. The Reveal 3-D line of food allergen tests kits is uniquely designed to guard against oversaturation and false negative results, with results displayed in three visual lines on the lateral flow test strip. A control line assures the test is working properly, and two other lines outline nondetectable, low, and high levels of mustard.
Consumables
Cover of a unique sealed structure design provides a two-way guarantee and ensures the sealing property Conical thickened design at the bottom to increase the maximum centrifugal limit Max. centrifugal force: 7000 xg Tolerable temperature range: -80℃-120℃ Clear scale for accurate and convenient data reading Sterile and RNase, DNase, human DNA and Pyrogen Free
COâ‚‚ Incubator
CO2 Tube Roller CTR-6 provides regulated rocking and rolling of maximum up to 6 rollers and is designed for use specifically in CO2 incubators. CTR-6 is specifically designed for use in harsh environments such as CO2 and humidity and provides reproducible results for cell culture growth. Possibility to remove rollers makes the unit flexible and allows for performing various procedures and techniques in various cultivation vessels.
Products Best Selling
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
Products Favourite
Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.
This product has multiple variants. The options may be chosen on the product page
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
BUFFERED SODIUM CHLORIDE PEPTONE SOLUTION