Swing-out rotor for conical bottom centrifuge tube. Aluminium buckets.

Tube holders material Aluminium
Rotor type Swing-out
Tube dimensions (Ø × length) 29 × 115 mm
Capacity 6
Tube’s volume 50 ml
Max. speed 4200 rpm
Max. RCF: LMC-3000 1610 × g
Max. RCF: LMC-4200R 3160 × g
Tube manufacturers Falcon, Greiner Bio-one, Sarstedt, Corning, Nunc, etc.
Autoclavable +

Used with

Laboratory bench-top centrifuge with refrigeration LMC-4200R provides temperature control of biomaterial during centrifugation. Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists because it ensures conditions necessary for reproducibility of the sample preparation stage. Temperature control absence at this stage can cause unpredictable results. LMC-4200R is a modern centrifuge designed for operation with microtest plates, gel cards and tubes from 10 to 50 ml.

LMC-3000 is a modern low-speed bench-top centrifuge designed for operation with microtest plates and centrifuge tubes up to 50 ml. This device is widely used in biomedical profile laboratories.

Documentation

SKUProductTypeLanguageFile
R-6R-6BrochureEnglishDownload

Related Products

Rotor for 12 × 0.5 ml and 12 × 0.2 ml microtest tubes.

Ø13 mm x 10 sockets, flat bottom, depth 30 mm.

Fixed-angle rotor for 24 - 1.5 or 2 ml microtubes.

Swing-out rotor for round bottom centrifuge tube.

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Swing-out rotor for standard 96-well microtitre plates, skirted PCR plates, deepwell plates up to 45mm.

Swing-out rotor for conical bottom centrifuge tube. Plastic buckets (POM Kocetal).

Rotor for 4 x 8-section 0,2 ml microtube strips * not compatible with Combi-Spins produced before 2015.

Swing-out rotor for round bottom centrifuge tube.

Swing-out rotor for conical bottom centrifuge tube.

Rotor for 6x2/1.5 ml + 6x0.5 ml + 6x0.2 ml microtest tubes.

Bucket rotor without bucket adapters.

Recently Viewed

Vaccine Refrigerators and Freezers

Voltage Stabilizer

The HVS-1000U voltage stabilizer is developed, designed and manufactured according to the latest PQS standards. The product consists of single-phase multi-tap dry type transformer, relay integrated board, single-chip intelligent detection board and supporting display , external protection and control circuit. The voltage stabilizer central control system adopts single-chip intelligent control, which highlights the safety, reliability and stability o f the voltage s tabilizer under bad power s up ply conditions. With intelligent control, high safety, high reliability and other significant advantages! IoT modules can be selected to remotely view the power supply and power quality analysis, and achieve remote alarm of abnormal situations

Mercaptoacetic acid sodium salt; Thioglycolic acid sodium salt

Mechanical Pipettes

Ecopipette Single Channel

Packed with ground-breaking features all around, CAPP’s innovative Ecopipette line of single-channel pipettes is designed to take manual liquid-handling workflows to a whole new level. With industry-leading accuracy and precision, Ecopipette laboratory pipettes minimize human error and maximize the reliability of manual liquid transfer in scientific experiments. By offering unparalleled quality and durability, Ecopipette single-channel pipettes are the laboratory pipette investment that holds value over time. Let’s outline a few reasons why you should invest in Ecopipette autoclavable pipettes today.

This product has multiple variants. The options may be chosen on the product page

Barium dinitrate; Nitric acid barium salt; Nitrobarite; Barium (II) Nitrate

Photometers and Densitometers

Photometer DEN-600

DEN-600 is a compact, portable, rechargeable battery powered photometer. DEN-600 comprises of 600 nm wavelength optical system, which enables to apply - 1) OD600 method that estimated total number of cells, 2) McFarland (McF) turbidity measurement method, 3) Bradford protein assay method for protein concentration measurement, 4) other methods that can be adjusted or optimized using 600 nm wavelength.

Products Best Selling

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

Products Favourite

20 × 0.2 ml microtubes + 12 × 1.5 ml microtubes

Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.

Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.

This product has multiple variants. The options may be chosen on the product page

LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.

A-12, adapter for work with tubes which are 12 mm in external diameter.

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.

Rotor R-6

SKU: BS-010208-DK Category: Brand:

Swing-out rotor for conical bottom centrifuge tube. Aluminium buckets.

Biosan

Rotor R-6
Rotor R-6