Termaks chambers provide an ideal solution for environmental, stability and climate applications. The new developed and refined range offers high reliability and repeatable performance without comprise. Powerful and optimally coordinated heating and cooling technology offers state of the art performance, energy efficiency and low noise. KB series is ideal for the most demanding pharmaceutical, biotech, and industrial use.
The refrigeration system is On Demand and only turns on when needed, reducing heat load and allowing units to run on standard single electrical circuits. KB 9400F has a heatless humidification system that further reduces heat load and energy usage. Lockable casters are standard and levelling feet and access ports among many other customization possibilities are optional.
Termaks also offer Customizations according to your special demands and applications.
Intuitive Controls with and easy to operate touchscreen display makes operating parameters highly visible. Extra features have been built in making it possible to control the Termaks Cabinets through CTS, PC or Gateway. Data logging and full Remote support via Connect allows you to control and program the system remotely, store data and event logs and much more.
The new refrigeration and dehumidification system offers great capacity and reliability. It is constantly controlled via electronic valves redirecting heat/cool upon system request allowing fast adjustments according to settings. Due to the system design the working range is far superior in its standard configuration and provides high RH recovery and temperature stability in its full range.
The humidification system offers high capacity and user friendliness without any requirements of regular maintenance. The system has built in autotest and includes process for self-cleaning in order to avoid unwanted growth. Furthermore, it offers automatic insufficient feed water supply and leakage management.
The series is easy to install, even for facilities without purified feed water supply or nearby drain. Different water feed and drains options available.
The control system is designed in accordance with EN61010 and has been EMC-tested in accordance with EN 60730-1 and EN 60730-2-14.
All Termaks Cabinets have a redundant system, that monitors all sensors and makes sure that a single fault can’t cause a malfunction.
Making the best use of valuable space in your lab, Termaks incubators are designed with a very small footprint ratio compared to the interior volume. In addition, the KB series offers very low noise level.
Highlights
- Temperature range -2°C to + 70°C
- 2 model sizes (182 and 400 litres volume)
- Validatable performance
- Dependable temperature and humidity performance, even at high and low ends of the range.
- Forced air circulation and air jacket
- Safety thermostats and redundant system for maximum protection
- Data logging and Remote support via Connect
- Access ports for data logging with external sensors (optional)
- Tripple glass front window with cover (optional)
- Light system, dual side (optional)
- Castors, lockable for increased mobility
Touch display Explanatory text – simpler to operate
Extended temperature range -2°C to + 70°C
Extensive humidity range 15-96 % RH
Remote support and logging via Connect
MODBUS communication
Full Installation Qualification/Operation Qualification/Process Qualification (IQ/OQ/PQ) documentation and services available.
Temperature and humidity
Not all climate chambers are the same. The humidity content of the chamber load, the ambient conditions and the respective temperature-humidity working range are decisive factors in the selection of the right appliance. In the adjacent diagram, you can see the possible temperature/humidity combinations for our chamber with humidification system (L).
Within the respective temperature-humidity range, condensation-free permanent operation is possible. To which extent condensation may occur in the threshold range depends on the humidity content of the chamber load and the ambient conditions.
Light, Temperature and humidity
KB 9400 series offers optional Light system for Day/Night simulation. The high-capacity light sources are placed in each side of the cabinet in order to maximize usable chamber space. The system allows up to maximum 25 000 Lux in sides, 12 000 Lux average in centrand is fully programmable with ramping options.
Termaks offers factory optimizations and validation according to specific protocols and demands.
Advantages:
- Precise performance
- Real time programming
- Intuitive and easy-to-use control panel
- Temperature, Humidity and Light ramps programmable via display or Connect
- High-quality, corrosion-resistant and chamber in stainless steel for easy cleaning
- State of the art cooling for a precise and homogenous temperature control
- Safety thermostats and redundant system for maximum protection
- Reliable
| KB 9400 L | KB 9400 F | KB 9400 FL | |
|---|---|---|---|
| TEMPERATURE CONTROL | |||
| Variation + / – ˚C | 0,1 | 0,1 | 0,1 |
| Deviation (spatial) + / – % | 0,2 | 0,2 | 0,2 |
| Readability / Setability ˚C | 0,1 | 0,1 | 0,1 |
| Range ˚C” | -2°C + 70°C | -2°C + 70°C | -2°C + 70°C |
| Sensor “K” | Yes | Yes | Yes |
| Controller | PID | PID | PID |
| Display | OLED | OLED | OLED |
| TIMER | |||
| Real time program * | Yes | Yes | Yes |
| Remote support via Connect | Optional | Optional | Optional |
| SAFETY | |||
| Alarm flashing / Acoustic | Yes | Yes | Yes |
| Alarm limit settable ˚C | Yes | Yes | Yes |
| Automatic safety setting ˚C | Yes | Yes | Yes |
| HUMIDITY | |||
| Humidity variation (time) +/- %RH | – | 2 | 2 |
| Humidity deviation (spatial) +/- %RH | – | 2 | 2 |
| Readability %RH | – | 0,1 | 0,1 |
| Setability %RH | – | 1 | 1 |
| Range setting %RH | – | 1-99 | 1-99 |
| Working range %RH | – | 15-96* | 15-96* |
| Capasative sensor | – | Yes | Yes |
| Controller | – | PID | PID |
| Water quality | – | Demineralized | Demineralized |
| Water feed pressure Bar | – | 1-6 | 1-6 |
| Water reservoir (optional) litres | – | 5 | 5 |
| LIGHT CONTROL |
|||
| Light readability/setability % | 3-100** | – | 3-100** |
| Light intensity in centre Lux | 12000 | – | 12000 |
| Light intensity both sides Lux | 25000 | – | 25000 |
| FEATURES | |||
| Door gasket silicone | Yes | Yes | Yes |
| Data port, MODBUS | Yes | Yes | Yes |
| Pot free alarm, output | Yes | Yes | Yes |
| SHELVES | |||
| Standard / Max pcs | 3/22 | 3/22 | 3/22 |
| Dimensions W × D mm | 610 × 580 | 610 × 580 | 610 × 580 |
| Max load pr shelf kg | 30 | 30 | 30 |
| Permitted total load kg | 120 | 120 | 120 |
| HEATING | |||
| Heating up time to 37°C mins | 27 | 30 | 33 |
| Heat transfer at 70°C W | 65 | 75 | 90 |
| POWER | |||
| Nominal Power W | 1200 | 1200 | 1200 |
| Nominal voltage V | 230 | 230 | 230 |
| Frequency Hz | 50/60 | 50/60 | 50/60 |
| DIMENSIONS | |||
| Exterior W × D × H mm | 920×720×1840 | 920×720×1840 | 920×720×1840 |
| Interior W × D × H mm | 630×592×1073 | 630×592×1073 | 630×592×1073 |
| Volume litres | 400 | 400 | 400 |
| WEIGHTS/VOLUME | |||
| Net weight kg | 210 | 230 | 240 |
| Shipping weight kg | 235 | 255 | 275 |
| Shipping dimensions | 1060x830x2040 | 1060x830x2040 | 1060x830x2040 |
| Shipping volume dm3 | 1795 | 1575 | 1795 |
*Humidifier disabled below +4°C and above +55°C
**Temperature settings are prioritized at low temperatures (factory setting)
General Documents
| Type | Name | Language | File |
|---|---|---|---|
| Catalogue | English | Download |
| Model | KB 9400 F, KB 9400 FL, KB 9400 L |
|---|
Related Products
Termaks incubators B-series are highly sensitive and very accurate. Ideal for all applications with temperatures up to +80°C and specifically for incubating living cultures at +37 °C. The newly developed control system allows fine tuning at any temperature in the range.
This product has multiple variants. The options may be chosen on the product page
The solution is widely used in bacteria, fungi and other microorganisms culture; as well as enzyme digestion reaction, ligation reaction, embedded incubation and other related constant temperature experiments. Precise and stable operation With optional real-time IoT monitoring
This product has multiple variants. The options may be chosen on the product page
Termaks compressor cooled incubators offers great performance and temperature stability. KB series is easy to use yet allowing extensive programmability and ramping options. The design gives rapid and precise temperature control, fast recovery and intelligent defrosting. Air circulation in the working chamber via Termaks sophisticated ventilation technology.
This product has multiple variants. The options may be chosen on the product page
Haier Biomedical IoT enabled CO2 incubator with 180°C dry heat sterilisation provides a safe and secure reproducible growth environment for cell cultures.
This product has multiple variants. The options may be chosen on the product page
Drug stability tests (made for stability studies according to ICH guidelines), cosmetic stability tests, food shelf life tests, electronic components aging tests, packaging material stability tests.
This product has multiple variants. The options may be chosen on the product page
The equipment finds extensive use across variety of settings, including the scientific research institutions, university laboratories and production departments, in the realms of environmental conservation, public health and epidemic prevention, agriculture and animal husbandry, drug testing, and aquatic industries. It is highly specialized in cultivation, enabling it to meet the cultivation and preservation of most bacteria, molds, and microorganisms, as well as to serve purposes such as water analysis and biochemical oxygen demand (BOD) determination, and it can also conduct darkroom cultivation of plant tissues.
This product has multiple variants. The options may be chosen on the product page
Termaks forced convention drying and heating chambers for fast drying and sterilization. Designed for excellent temperature distribution with variable fan settings temperature the entire range offers very high temperature stability up to +250°C.
This product has multiple variants. The options may be chosen on the product page
The CO2 incubator is the most important piece of equipment for biosafety laboratory R&D. The Haier Biomedical CO2 incubator uses professional and superior technology to provide reliable conditions for frontline medical staff to carry out epidemiological and translational research, and to create a stable cell and virus culture environment for researchers.
This product has multiple variants. The options may be chosen on the product pageRecently Viewed
ELISA Line
Plate Thermo–Shakers are designed for shaking and thermostating 4 standard 96–well microplates.
Monopotassium phosphate, Potassium dihydrogen phosphate Monobasic
Reagents
3,8-Diamino-5-ethyl-6-phenylphenanthridinium bromide, EtBr, Homidium bromide
Consumables
Made of medical-grade polypropylene; free of release agent, plasticizer, bacteriostatic agent, and heavy metal ion High-clarity tube body for convenient sample observation Tube cover of a unique design for enhanced sealing and single-handed operation Flat cover design facilitates writing and making Can withstand a temperature range of -20℃-121℃ and suit high-speed centrifugation
This product has multiple variants. The options may be chosen on the product page
Products Best Selling
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
Applicable for storing wholeblood, medicines, biological products and other laboratory products that need to be stored at 4℃. Suitable for the storage of blood and blood articles in areas that have power shortages.
Products Favourite
Applicable for blood stations, hospitals, CDC's, scientific research institutes, chemical industry and other related industries. The -30°C Biomedical Freezer can cryopreserve plasma, biological products, components, materials, and other items that need to be kept at low temperature.
This product has multiple variants. The options may be chosen on the product page
LN2 backup cooling system is an independent refrigeration system for a ULT freezer. When there is a loss of power or the temperature of the freezer rises to the high alarm set point, the LN2 backup system can be automatically activated to inject LN2 into the chamber to maintain the freezer temperature. The backup system operates on a rechargeable battery when there is a loss of main power.
The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program
For the separation and purification of samples of cells, macromolecular proteins, blood, body fluids, DNA/RNA, plasmids, bacteria and viruses.
Sterile TPP TubeSpin® Bioreactor vessel, 50 ml, with pH and O2 sensor spots, 1 pce.
Environmental test, Stability and Climate chambers
Termaks chambers provide an ideal solution for environmental, stability and climate applications. The new developed and refined range offers high reliability and repeatable performance without comprise. Powerful and optimally coordinated heating and cooling technology offers state of the art performance, energy efficiency and low noise. KB series is ideal for the most demanding pharmaceutical, biotech, and industrial use.
